Windows 7 seems slow ? Optimize it.

Windows 7 is hungry for resources. It features many visual effects that draw heavy on your graphics card and system memory. 

The first thing that you can try is the Performance troubleshooter, which can automatically find and fix windows 7 problems. The Performance troubleshooter checks issues that might slow down your computer's performance, such as how many users are currently logged on to the computer and whether multiple programs are running at the same time. 

If your system was slow out of the box, chances are you can easily fix that by turning off superfluous effects.

Step1: For open performance troubleshooter, click on "start", now open "troubleshooter" from 'control panel' and click on "Check for performance issues" under "System and Security".

There are many reasons why windows performance slow, Follow more steps to improve windows 7 system performance -

Step2: Delete the programs which you never use.

Step3: Only number of programs runs at a time.

Step4: Defragment your hard disk at a weekly basis.

Step5: Clean up your hard disk for fix unwanted thread issue.

Step6: Run fewer programs at the same time.

Step7: Turn off visual effects which not needed.

Step8: Restart your system at regularly basis.

Step9: You can add more memory to improve system performance.

Step10: Always enable your antivirus to check for viruses and spyware in your system.

See also: Windows 7 Crash? It Is Easy to Fix It >>

Read More

Firefox is OK but IE not connecting

If Firefox is connecting to the Internet but Internet Explorer doesn't, you've facing several possible problems. In this situation, you need to troubleshoot Internet Explorer directly whether there is a problem with its connection or configuration settings or if you have a faulty add-on installed. Find technical support and follow easy steps for fix internet not working problem in IE -

Step1: First type "Inetcpl.cpl" in the search box and press "Enter". It will open your internet properties.

Step2: Now click on "Connections" tab. Now look in the dial-up and virtual private network settings box. Unless you have a dial-up connection or connect to a VPN, this box should be empty. Click to highlight anything in this box, and click on the "Remove" button.

Step3: Now click on "LAN Settings" button and click to place a check in the selection box next to "Automatically detect settings".

Step4: Now click to deselect the "Use automatic configuration script" box.

Step5: Look at the proxy server section and Click to deselect the "Use a proxy" check box and then click "OK". Now Test IE to see if it can connect to the Internet or not. If not check the faulty Add-ons, then -

Step6: Now type "iexplore –extoff" in search box. It will open explorer without any add-ons.

Step7: Now click in the address bar and type in a web address field and click on "Enter". If the Web address loads, there's a problem with one of your add-ons.

Step8: Now go to "Manage Add-ons" from "tools". It will open a window containing your installed add-ons. The add-ons are grouped by their names and types on the center of the screen.

Step9: Mow right-click an add-on and click "Disabled" and then test the connection again.

Repeat this process until you find which add-on is causing the problem and reset your internet explorer to default setting.

Step10: First close IE and search "Inetcpl.cpl" in search box. It will open internet properties.

Step11: Now click on "Advanced" tab and then click the "Reset" button. It will open a reset internet explorer settings window. 

Step12: At last click to select the "Delete Personal Settings" dialog and then click the "Reset". It restores your browser settings to the default.

Now its time to restart your computer and check that it is working or not. Until you find the same issue, find online technical support for Microsoft products just a click away.

I hope it will help you.

Thanks,

Find News: Microsoft is looming or booming with internet explorersecurity concerns >>

Read More

Control two monitor : Windows 7 aero snap feature

The Windows 7 support its aero interface not only looks great but also include a lot of useful features; one of the best is "aero snap" or "windows snap", a way to move open windows around quickly. Using aero snap is a little tricky at first, but with some practice, you'll get the hang of it(Fix Windows 7 hang up). Windows 7 provides a new feature which is called "Aero Snap". You can minimize, maximize, resize window by just dragging-dropping it to the screen corners. It is very useful and interesting feature in Windows 7.

For a Single Display

Windows Key + Left Arrow = Snap the current active window to the left side of the screen or unsnap a window that is snapped to the right side of the screen.

Windows Key + Right Arrow = Snap the current active window to the right side of the screen, or unsnap a window that is snapped to the left side of the screen.

Windows Key + Up Arrow = Maximize the current active window to full screen.

Windows Key + Down Arrow = Minimize the current active window to the taskbar.

(also find here..how to fix windows 7 computer freeze problem..)

If you have two monitors then the far left side would be on the left side of monitor and the far right side would be on the right side of monitor. If you want the window to snap to the side that crosses over to the other monitor, then you can only use the keyboard shortcuts below to do so.

Windows 7 support snap changes the way you resize open windows on your desktop. By dragging a window to the edge of your screen, it will allow you to maximize it, stand side-by-side or stretch it vertically. Snap works on all versions of Windows 7.

For a Dual Display

·         Active window on right display:

Windows Key + Right Arrow = Snap to the right on the right display.

Windows Key + Left Arrow = Snap to the left on the right display.

Windows Key + Left Arrow + Left Arrow (Left arrow two times) = Snap to the right on the left display (change display).

·          Active window on left display:

Windows Key + Left Arrow = Snap to the left on the left display.

Windows Key + Right Arrow = Snap to the right o the left display.

Windows Key + Right Arrow + Right Arrow) = Snap to the left on the right display (change display).

Note: On multiple monitors, continually pressing a keyboard shortcut combination below will cause the window to snap to the side and scroll in that direction through the multiple monitor screens.

Relevant topic: How to Install Windows 7 on a Netbook With No Optical Drive >>

Read More

How to fix common microsoft error codes

Having trouble with Microsoft error codes? We are discussing how to fix most common errors.

Microsoft's software products that largely run the computer industry and according to a survey the Microsoft Windows operating system ran on approximately 90 percent of the world's computers at the end of 2009. With so many users, the high frequency of reported problems has caused the company to develop efficient ways to track and resolve errors. When try to fix microsoft errors codes, also learn about what is runtime error 429 - how to fix it?

Find here easy steps to solve most common errors of Microsoft -

Step1: The complexity of Microsoft products requires a central portal for documentation and troubleshooting and the Microsoft support tackles the majority of errors codes. You can find a proper solution for a particular error .Many times to fix for a Microsoft error requires an operating system update. These programs are easily downloaded through the support center and are available for free to registered Microsoft users.

Step2: Before that check the warranty protection provided by Microsoft for the software package experiencing errors codes. It might be handling by Microsoft; also replacement of damage pregame/software is necessary to resolve the errors codes.

Step3: Also confirm that system is still under warranty by the computer manufacturer or time has been over. When your time has been over, a online technical support must be needed to encounter your problem. A technician will connect you and interact with the system in real-time mode. Most Microsoft errors codes problems are addressed easily via this service.

You will find quick, efficient answers and proper solution for any Microsoft error codes.

See also:  How to scan windows 7 system files to repair errors >>

Read More

Why is my outlook not responding

Most users of Microsoft outlook have most likely come across this problem at some point. It can occur when Outlook is closed and then the user tries to open it again from its system tray icon. This icon will remain in the system tray until the computer is rebooted and can cause problems if Outlook is shared because the database remains open while this icon is active.

When using Outlook Express, you may occasionally experience a problem where the application freezes and stops responding, especially if you have recently tried to switch identities within Outlook Express. Fixing this Microsoft Outlook problems requires deleting a value in the Windows registry when Microsoft outlook won't open or outlook not responding. And some easy steps to fix it -

Step1: First check that your computer is logged with administrative privileges. So login with Administrator account.

Step2: Start from registry editor. Go to "run" and type "regedit" and click on "OK".

Step3: Navigate to the HKEY_CURRENT_USER\Identities directory in the registry editor window.

Step4: Highlight the "Identities" folder on the left side of the registry editor window.

Step5: Now click on the item labeled "Changing" in the main section of the window and go to "Edit" menu and choose "Delete".

Step6: Press "Yes" to confirm your decision to remove the registry item. 

When you restart Outlook Express, the program will respond normally.

See also: Online Microsoft Outlook Support

Read More

What are the Windows A: and B: drives used for?

In Windows you have a C: drive. Everything labeled beyond that is with the following letter. So your second drive is D: ,your DVD is E: and if you put in a USB stick it becomes F: and the following drive G:. And so on and so forth. But then, what and where are A: and B: drive?

The early CP/M and IBM PC style computers had no hard drive. You had one floppy drive, and that was it. If you had only one drive it was common to boot from one disk, put in the other disk with your programs and data then run the program. Once the program finished, the computer would request that you reinsert the boot disk so you could use the command line again. It Copying data from one disk to the other was a series of "Please insert source disk into drive A:... Please insert destination disk into drive A:... Please insert source disk into drive A:... . . ."

By the time hard drives became very cheap and the expensive computers typically had two floppy drives (one to boot and run common programs, one to save data and run specific programs). And so it was common for the motherboard hardware to support two floppy drives at fixed system addresses. It was built into the hardware. It was thought that building the same requirement into the OS was acceptable and any hard drives added to the machine would start with disk C: and so forth.

A lot of software was developed since that time, and unfortunately much of it expected to see long-term storage on the C: drive. This includes the BIOS software that boots the computer. You can still attach two floppy drives, boot into DOS 6.1, and use it as you would have in the early 90's, with floppy drives A and B.

So largely the reason for starting the hard drive at C is for backwards compatibility and you can assign the letters C through Z to each drive on your computer. A and B are usually reserved for floppy disk drives, but if your computer does not have floppy disk drives, you can assign A and B to volumes.

The author of particularly this blog is a senior technical blogger & writer who share his tips & ideas about each & every topics of Microsoft support & given tips to solve very common & most occurring Microsoft outlook problem on his Microsoft outlook help blog.

See also here: how to partition hard drive in windows 7 computer >>

Read More

How to check your windows is genuine

The Windows Genuine Advantage (WGA) program is part of the commitment by Microsoft for check that your copy of Windows is genuine or not & protect its customers and partners policies and laws. By using genuine Microsoft software, you can be confident that you will have access to the latest features, security, and Microsoft support. This helps improve your productivity and expand the capabilities of your computer.

 Here are easy steps to remove windows genuine advantage notification and check that you are using a genuine copy or not -

Step1: Open "Internet Explorer".

Step2: Go to "Internet Options" from "Tools" menu.

Step3: Click on "Security" tab and then click on "Internet".

Step4: Click on "Custom Level" under the 'Security level for this zone'.

Step5: Now under the ActiveX controls and plug-ins, click on Prompt for all the following options

• Download signed ActiveX controls

• Run ActiveX controls and

• Script ActiveX controls marked safe for scripting

Step6: Click on "OK" and click on "Yes".

Step7: Click on "OK".         

Step8: Now try again to validate your copy of Windows. When you are prompted to install the WGA ActiveX control, verify that the publisher is Microsoft Corporation and then click "Install". After your copy of Windows XP is validated, you return to the download that you requested and then click on "Download".

Find here easy guide for how to fix Windows 7 Windows Genuine Advantage >>

Read More

How to Recall an Email Sent in Microsoft Outlook

E-mail is a fast way to communicate with your co-workers, schedule meetings, and share documents. So it is also possible that you send an email message to someone by mistake or accidentally and now you want to recall it. It is very common problem when send a email accidentally to other. Microsoft outlook support to fix this kind of user generated problem by Recall message.(see also:How to Change Email Security Settings )

If you send a message by accident, you can attempt to recall the message from the recipients using "Recall This Message" on the "Tools" menu. The message recall feature allows you to recall, replace, or delete messages that you have sent. 

To recall the email-message follow some instructions below-

Step1: Open the target message which you want to recall from sent items folder in outlook.

Step2: On the Actions menu, click Recall This Message.

Step3: If your message hasn't already been opened by someone at recipient side, either delete the message or replace it with a new message. To receive notification about the success of the recall or replacement, click to select "Tell me if recall succeeds or fails for each recipient" check box. 

Step4: If you are sending a message and receipt by multiple recipient you can request notification of whether the recall succeeded or failed for each one.

Message Recall will not be successful if: 

1. The recipient is not logged on to the mail service provider. 

2. The message has been read. This includes viewing the message with the Preview Pane so that the message is flagged as Read. 

Also find here emails stuck problem in Microsoft Outlook.

Read More